Latest in Your Instrumentation

Find your career in Instrumentation # We are not responsible for any error/ mistakes in the contents of this blog # Please send us the updates/ Articles/ Conference lists to us for a free publication in this blog >> # Welcome to "Your Instrumentation" # Contact me through yourinstrumentation@gmail.com # Find out your successful career in Instrumentation

Wednesday, July 16, 2014

Wednesday, July 2, 2014

TK3 Calibration Instrument


The TK3 Calibration instrument simulates shaft vibration and position for calibrating Bently Nevada monitors. It verifies the operating condition of the monitor readouts as well as the condition of the proximity transducer system. A properly calibrated system means that the monitor readings and transducer inputs are accurate. A spindle micrometer is used to check the transducer system and position monitor calibration. A probe mounting adapter provided with the TK3 holds the probe while the targt is moved toward or away from the probe tip in calibrated increments. The output from the proximitor sensor is recorded using a voltmeter.
Vibration monitors are calibrated using the motor-driven wobble plate to hold the proximity probe in place. The holder is located over the wobble plate to hold the proximity probe in place. The holder and probe are adjusted to a position where the desired amount of mechanical vibration is found. The vibration is then measured using a dial micrometer that is supplied with the unit (no oscilloscope is needed).
A vibration monitor's reading can then be compared to the known mechanical vibration signal input. The mechanical vibration signal from the TK3 can range from 50 to 254 micro meter (2 to 10 mils) peak-to-peak.

Tuesday, July 1, 2014

The Roboversity Summer Training and Internship Program

The Roboversity Summer Training and Internship Program

              
Workshop Details
The Roboversity Summer Training cum Internship Program is a fast paced internship and training program for robotics enthusiasts to explore and learn the vast field of robotics at a lightning pace! This is the program where learning happens not by listening, but by doing! Each participant will develop 7 different robots using combinations of various technologies in a span of 15 days. The program is going to be fast, exhaustive, challenging and fun at the same time.

Workshop Specialities:

  • Understand, design and develop 7 robots yourself under the guidance of our faculty
    • Basic
      • Line Follower Robot
      • Obstacle Avoider Robot
      • Obstace Follower Robot
      • Phototropic Robot
      • Photophobic Robot
    • Medium
      • Mobile Robotics
      • Maze Solver Robot
    • Advanced
      • Swarm Robotics
      • Gesture Based Robot
  • The workshop is desgined and developed by IIT Kanpur Engineering Graduates
  • Certification from Roboversity and MobMe Wireless (for Mobile Robot)

Outcomes:

Highlights of Program:

  • Learn to Design and Build 7 different kinds of robots involving concepts from Sensor Based Autonomous Robotics, Mobile Operated Robots, Swarm Robotics and Gesture Based Robotics
  • Courses designed by graduates of IIT Kanpur
  • Well-structured program that spans from basics to advanced robotics
  • Develop live working Robotics Projects
  • Complete Kit and software resources provided to participants
  • Encourages participants to think and come up with new designs
  • Online Examination and certificate with score

Certification:

  • Industry certificate from MobMe Wireless
  • Certificate of Participation to all the participants
    • With Online Examination Scores for those who qualify
    • Without Online Examination Scores for those who donot qualify
  • Certificate of Merit by Roboversity and MobMe Wireless to the top-performers
    • The names of the winners will be put up on our participant-awards page permanently

Awards:

The following awards will be given to top-performing participants
  • Best Project Award
  • Best Fabrication Award
  • Fastest Fabrication Award
  • Innovation Award

Workshop Course Content:

  • Understanding the application of various sensors and integration with Microcontrollers
  • Exposure to Mobile Communication
  • Understanding of Accelerometer sensors
  • Introduction to Swarm Intelligence and its implementation in Robotics
  • Understanding the structure and programming of Microcontrollers
  • Live testing and competition of robots

Topics to be covered:

  • Basics of Robotics
  • Embedded Systems and embedded C programming
  • Sensor Guided Autonomous Robotics - using various sensors
  • Mobile operated Robotics - using DTMF module
  • Gesture Based Robotics - using Accelerometer
  • Swarm Robotics - using RF module

Kit Details:

The following kit would be given to the participants

Hardware:

  • Skyfi Labs' Robotics Development Board
  • Microcontroller
  • All ICs and IC Holders
  • DC Motors
  • Wheels
  • IR Sensors
  • DTMF decoder module
  • Audio jack
  • Accelerometer Sensors
  • RF Tx-Rx Module
  • Programming Cable
  • 12 V Battery
  • Chassis
  • Digital Multi Meter*
  • Working Tools*
  • Other miscellaneous items




OtherMaterial:

* will be taken back after the workshop

Booklets on

  • ICs and Microcontroller
  • Skyfi Labs' robotics development board
  • All the sensors and components used in the workshop
  • Programming and burning software
  • Maintenance of robots

Who should attend?

  • Student from any background with interest in robotics

Contact Details

Please feel free to contact us in case of any queries. 
Email: info@roboversity.com
Phone: Office: 080-41120662, 080-28531277, Support Team: +91-8050055611 
http://summertraining.roboversity.com/

B. Tech In Instrumentation (AEI, EI, IC, C&I, IE) | Updated List 2014


National Symposium on Instrumentation (NSI-39) by Instrument Society of India (ISOI)

Venue: Gurukul Kangri University, Haridwar-249402.
Last date for submission of abstracts: September 1, 2014.
 


For Template and instructions, Model abstract, Keywords please check this link ISOI
 

Abstracts (in MS-word format) needs to be send by e-mail to: isoi.iisc@gmail.com with subject as first key word of your abstract.
 

The abstract file name should be: first author name.doc.
 

Application for registration: WORD FILE
 

last date for registration: September 30, 2014


For submission of abstracts and registration contact:

 
Hon. General Secretary
NSI-39
Instrument Society of India
Indian Institute of Science, Bangalore-560012, INDIA
Telefax: 080- 22932273
Email: isoi.iisc@gmail.com, solarjnr@gmail.com

Techjeeva Quadcopter workshop



Check Website for more details: http://www.techjeeva.com/quadcopter-workshop
Related Posts Plugin for WordPress, Blogger...